How do I set focus follows mouse?

  • Is there a way to set up "focus follows mouse" behavior in Unity?

    You probably want to remove the appmenu-* packages if you enable focus follows mouse mode. Otherwise menus become very anoying to use.

    @brandon In Precise 12.04, the availablity of the Head-Up Display (HUD) mitigates the Unified Menu Bar (UMB) problems, as does the older Alt-F10 option for getting to the menu. For those that love the keyboard, focus follows mouse can still be great. See also the suggestions and discussion at Bug #674138 ""Global” appmenu breaks sloppy focus” : Bugs : unity

  • fossfreedom

    fossfreedom Correct answer

    9 years ago

    13.04 and later (GUI)

    Follow-on-focus settings can be set using the unity-tweak-tool Install unity-tweak-tool

    enter image description here

    enter image description here

    12.10 and later (command line)

    The following controls follow-on focus

    gsettings set org.gnome.desktop.wm.preferences focus-mode 'sloppy'


    gsettings set org.gnome.desktop.wm.preferences focus-mode 'mouse'

    Use the value 'click' to reset to the standard focus-control.

    Note: the difference between 'sloppy' and 'mouse' is described at the bottom of this answer.

    In addition you have the following option which when set, automatically raises the window to have focus:

    gsettings set org.gnome.desktop.wm.preferences auto-raise true

    You can control the delay for this auto-raise capability (in milliseconds):

    gsettings set org.gnome.desktop.wm.preferences auto-raise-delay 500

    You can change raise-on-click to control what window is on top:

    gsettings set org.gnome.desktop.wm.preferences raise-on-click false


    Two methods for 12.04 are presented below:

    method 1

    enter image description here

    Use gconf-editor and change the focus-mode value shown to mouse or sloppy

    (see note below)

    If do not have gconf-editor already installed then you can install via the terminal command:

    sudo apt-get install gconf-editor

    In addition you have the following key which when set, automatically raises the window to have focus - auto-raise.

    You can control the delay for this auto-raise capability (in milliseconds) by changing the key value auto-raise-delay

    method 2

    use gnome-tweak-tool

    enter image description here

    change windows focus mode to mouse or sloppy

    (see note below)

    "mouse" vs "sloppy"

    A focus mode "sloppy" seems to work better at allowing Alt+TAB to override focus.

    "mouse" means that if the mouse isn't in the window, the window isn't selected, no matter what you've selected in any other way.

    The window focus mode indicates how windows are activated. It has three possible values; "click" means windows must be clicked in order to focus them, "sloppy" means windows are focused when the mouse enters the window, and "mouse" means windows are focused when the mouse enters the window and unfocused when the mouse leaves the window.

    Controlling What Window is on Top

    The following window options control what window is in the front of others (or "on top"). It's slightly different than what window has the input focus. The following descriptions help explain slightly.


    Some users who use focus-follows-mouse do not like the windows the interact with to come to the top unless they explicity click on the tilebar of the window. This gives a finer grain of control when working with multiple windows, but can be frustrating for most users.


    Some users who use focus-follows-mouse, like to have the window their cursor is over automatically raise to the top. This makes the window in full view, with no other windows eclipsing it.


    The length of time to wait before triggering the auto-raise behavior.

    Interestingly, on my 12.10 install, `gsettings ... 'sloppy'` has the same effect as `'mouse'` and thus effectively breaks selection.

    I wish I could upvote this answer for every time I need to look it up. Thanks.

    Since basic WM functions are not accessible in the default install, one has to wonder why this tweak tool isn't installed by default, replacing the meager default system settings software entirely.

    Note: Command line doesn't work with sudo

    I have _sloppy_ focus enabled. This works fine as long as I stay on one workspace. However when I move to another workspace, the window under the pointer gets focus. This is bad, because the pointer position has nothing to do with the windows on the _new_ workspace. Can focus be constrained to _enter_ / _leave_ / _click_ events?

  • This can be done through CompizConfig Settings Manager. I've tested it on 11.10, 12.04, and 12.10, and Elder Geek successfully tested it on 14.04. and 16.04


    Select the "Focus & Raise Behavior Tab", then uncheck "Click To Focus." Make sure "Auto-Raise" is checked.

    More CompizConfig

    If you don't have CompizConfig Settings Manager (also known as 'CCSM') installed, you can do so from the Software Center, or from the command line:

    sudo apt-get install compizconfig-settings-manager

    You can then launch it with as ccsm from the command line, or from the launcher with "compiz" or "ccsm",

    Here are some general caveats for running ccsm: what are some of the issues with ccsm?

    The answer is in itself correct. Maybe one should explictly mention that using this without auto-raise effectively breaks - switching: No matter what gets selected, the window under the mouse cursor becomes active.

    @cfi I think this depends on the auto-raise interval -- I run in this fashion myself. The default isn't zero, as far as I know. What are the settings that would effectively break alt-tab?

    Are you saying that even with auto raising disabled, the value of the auto-raise interval does matter??

    @cfi -- ha - no, right, that wouldn't make sense (and I hope that's not what I've set to). I'll check my various installations and see if I can clarify and address your point.

  • While you can use the gconf-editor or gnome-tweak-tool to do this, they are not installed by default. I also found (on the intarwebs from

    gconftool-2 --type string --set /apps/metacity/general/focus_mode mouse
    gconftool-2 --type boolean --set /apps/metacity/general/auto_raise true
    gconftool-2 --type integer --set /apps/metacity/general/auto_raise_delay 600

    Personally, I don't like the auto_raise feature, so I set the second option to "false" and didn't set the auto_raise_delay option.

    Note, however, that this ultimately "breaks" the Unified Menu Bar (UMB) (when you mouse off the item you're using and onto another one, the Unified Menu Bar is now reflective of whatever you're now hovering over).

    Two Workarounds:

    • Move the window to the top of the screen before accessing UMB
    • Press F10, which will keep UMB open on focused window for you to interact with

    Tested as recently as Precise

    more edits: I've put "breaks" in quotes - yes, it's not really broken, but it breaks IMO the intent of the UMB, or at least makes it challenging to use as Reese correctly points out in the comment. IMO, that's a "breaks simple usability, but with an annoying workaround." Though given Linux's focus on providing very strong multitasking (which tends to lead to a "cluttered" desktop), it seems that either the UMB diminishes multitasking, or multitasking diminishes the UMB's capabilities. I'll leave that as an exercise to the reader to decide...

    There should be a delay after which the focus would change, defaulting to e.g. 200ms - this would allow to quickly move across other windows to reach the UMB for example.

    if you prefer to not have a window raised when you interact with it, useful for things like keeping a log tail in a terminal on top while you interact with a browser, the setting you want is: `gconftool-2 --type boolean --set /apps/metacity/general/raise_on_click false`. Use this in combination with auto_raise false. With this setting windows can still be raised by clicking on the title bar.

    Where do you get gconftool-2 from?

    On Gnome 2.16.0 you have to restart `gnome-session` for the `gconftool-2` settings to have effect.

  • Another way to enable focus-follows-mouse worked for me in a recent 12.10 install. There is currently a bug in 12.10 (and a special shout-out to nealmcb for the link) that causes changes made with ccsm or gsettings to revert on logout or reboot. I tried a couple different ways of tricking the bug, but eventually had success with this post about using Unsettings.

    In case that page migrates away, the process boils down to:

    sudo add-apt-repository ppa:diesch/testing
    sudo apt-get update
    sudo apt-get install unsettings

    Start up unsettings, go to the Windows tab, and turn off Click to Focus. I rebooted to get it to "take", but probably only needed to log out and back in again.

    For future reference, it sounds like this bugfix will be available shortly, so the normal methods of CCSM or gsettings should go back to working correctly.

License under CC-BY-SA with attribution

Content dated before 6/26/2020 9:53 AM