Is it possible to boot Ubuntu using the Windows bootloader?
As noted by many people, Windows 8's UEFI requirements
might willwon't get in the way of installing Linux (or whatever), as the replacement bootloader will also need to be signed somehow. Some systemsAll systems will let you disable the signature requirement, but the feature might be hidden to disable or you might not be willing to give up on the benefits of a secure bootloader.
Is it necessary to replace the bootloader in the first place? To keep ourselves to software that's gone golden, how can I install Ubuntu 11.04 using Windows 7's own bootloader?
Assuming that Windows is already installed, install Ubuntu on another partition. Make sure that you install Grub2 on the Ubuntu partition - don't install it on the MBR since this will overwrite the Windows boot-loader.
Boot into Windows and install EasyBCD
Add Entry and choose Grub2 i.e.
Then write back the modified Windows Boot-loader i.e.
Reboot - you will now have two options:
Boot into Ubuntu and change the Grub Timeout value i.e.
gksudo gedit /etc/default/grub
change "GRUB_TIMEOUT=10" to "GRUB_TIMEOUT=0" and save.
On newer EasyBCD, you don't need to perform the Write MBR step because it restores the default one, with windows only. You only have to add the Grub 2 menu entry, and save it.
EasyBCD, as far as I've seen, does not work with uefi bootloaders. It will only work with mbr.
Does this work if ubuntu and windows are installed i different hdd instead of same hdd different partitions? Also does it have to be grub2 or grub is fine too?
`Make sure that you install Grub2 on the Ubuntu partition - don't install it on the MBR` – does that mean (on the Ubuntu installer "something else" → "Device for boot loader installation" to use `/dev/sda` instead of `/dev/sda1` (windows), or should I really go for Linux (`/boot`, due to encryption) partition (`/dev/sda4` in my case)?
I've been through it. Here's the way I solved it.
You need to restore MBR, so it boots into Windows again, not Linux, THEN add Linux.
- Boot from Windows installation disk;
- Choose Repair/Startup repair; Windows will restore MBR;
- When done, reboot into Windows;
- Open EasyBCD, and add Linux;
- On reboot, you will see the good old black screen with Windows bootloader and two entries: Windows and Linux;
I've found this very usefull but found an easier way to fix this. When you have access to your windows installation and have EasyBCD installed. You can just repair you MBR from within the tool.(done with EasyBCD 188.8.131.52)
Open EasyBCD and click on "BCD Deployement"
In the section "MBR Configuration Options" ensure that "Install the Windows Vista/7 bootloader to the MBR" is selected and click the "Write MBR" button
Reboot and enjoy the magic of Windows Bootloader
Hope this helps someone